Automatic Transfer Switch (ATS)
DGP Automatic Transfer Switch (ATS) is a single Phase Dual Input rack mountable Power Distribution Unit (PDU). When Input A falls below 168 VAC and Input B is valid, the output is automatically transferred to Input B. The output is transferred back to Input A when Input A is valid and rises above 178 VAC. This high speed transfer rate ensures that the transfer is transparent to the sensitive equipment. The two sources are not required to be in phase. This is an effective solution that builds in redundancy and increases the AC power availability of connected equipment. If the dual input power is fed through two independent AC sources, then the system availability is increased and the dual input advantages are fully used.
Features
Common
Redundant Protection
When main power fails, it will automatically switch to backup power.
Threshold Sensing
User-definable warning and overload threshold value as the basis for alarm
Central Management
Free centralized monitoring software, real-time monitoring of a large number of PDU
kWh Measurement
Voltage, frequency, PF, active power, apparent power and kWh measurement.
Mail Notification
Notify user by mail and SNMP when outlet action or current over threshold
Environment Detection
Optional accessory probe to detect temperature and humidity.
Event Alert
If current exceeds the preset threshold, PDU will beep and LED will flash
Available by Model
Overload Protection
When overload, breaker will be tripped to protect the safety of electricity
Schedule Control
Timed & scheduled on/off/reboot control.
Group Control
Set multiple outlets as a single group while controlling the power output.
Power Sequence
User-definable power on/off sequence time
Ping Event Control
No response by PING, the output will perform a preset power action.
